Enclosure Styles
Wall Mounting Enclosures
(For General purpose, medium sized installation)
CORN S-Series are wall mountable, general purpose enclosures perfect for protecting important electrical and electronic gear. Ranging from 300-1200mm in height, they are suitable for small to medium sized electrical installations. All models come with spanner locks, and if extra security is required, we have a pad-lockable upgrade as an option
- 5mm fully welding construction
- Stainless 316, powder coated cold rolled mild steel or Aluminium
- 8mm square key-ed locks for secure and easy access
- Heavy duty concealed hinges with removable pin
- IP rated and 3rd party tested according to IEC60529
- Various colour options available, e.g., Orange, Blue
- Precision Foam In Place gasket
Floor Standing Enclosures
(For Large size installations)
CORN’s floor standing stainless or mild steel enclosures provide protection for large and complex electrical configurations. Specifically designed for large and/or heavy equipment, these enclosures are easy to use, reducing accidental damage to gear and staff. The F Series enclosures use swing-handle 3 point locks that are pad-lockable for increased security. All models come with a mounting plinth and bottom gland plate as standard.
- Single or Double door configurations
- Inner door kit available
- Padlockable lock system for added security
- Heavy duty concealed hinges with removable pin
- IP rated and 3rd party tested according to IEC60529
- Orange mild steel cabinets available
- Precision Foam In Place gasket
Inclined Roof Enclosures
(For preventing particle or liquid build up on the enclosure)
CORN’s I-series enclosures are enclosures with a slope roof. They feature a 30-degree overhanging sloped roof, which prevents particles or water from accumulating on top of the enclosure and door opening. These enclosures have integrated mounting flange for mounting onto struts, walls or brackets. Standard configuration includes spanner locks, but optional swing-handle locks are available.
- Fully welded with 1.5mm thick materials
- Standard spanner locks with swing-handle as an option
- 30 degrees inclined roof
- Heavy duty concealed hinges with removable pin
- IP rated and 3rd party tested according to IEC60529
- Precision Foam In Place gasket
Terminal Boxes
(small sized installation with screw on lid)
The T-Series enclosures are used for housing terminals and other small equipment. Featuring screw on lids, these enclosures protects and deters undesired meddling. With the integrated mounting flange, they are easily installed on any surface or mounting gear. All models come standard with an internal gear plate.
- Screw on lid
- 5mm fully welded construction
- Mounting Pan included
- IP rated and 3rd party tested according to IEC60529
- Precision foam in place gasket
Push-button Stations
(For housing control instruments)
The P-Series enclosures can be mounted on machines, desks or pedestals and are intended for housing human interactive devices. Holes for push buttons are pre-cut and there is a wide range of configurations to choose from. They feature screw on lid and mounting flanges on the sides of the enclosure.
- Cut-outs for push buttons
- 5mm fully welded construction
- IP rated and 3rd party tested according to IEC60529
- Precision foam in place gasket
Check out our enclosures available in:
